Two deals add 80MW of US storage

Laurel Mountain, West Virginia – A previous collaborative project between AES and PJM.

Laurel Mountain, West Virginia – A previous collaborative project between AES and PJM. Photo from AES Corporation.

US grid operator PJM Interconnection, whose operations serves 60 million Americans across the Midwest and northeast of the country, has hit the renewables headlines twice this week for signing up to two separate energy storage deals.
Read more →

Lithium-sulphur makes a splash

Oak Ridge National Laboratory develop lithium-sulphur battery

New lithium-sulphur battery. Photo courtesy of Oak Ridge National Laboratory.

Lithium-sulphur technology batteries made headlines this week with the announcement that a consortium of leading energy companies is planning to develop what it describes as “safe, lightweight and robust solar energy storage systems for the military around the world.”

The group consists of battery developer OXIS; battery, charger and power management company Lincad; PureWafer, from the photovoltaic sector; and inverter manufacturer Solutronic. The consortium cites lithium-sulphur cell technology as being extremely lightweight and able to withstand extreme abuse, making it ideal for military applications.

Another factor in lithium-sulphur’s favour is its potential to outclass traditional lithium-ion in the capacity stakes. According to Megan Treacy, reporting for Tree Hugger, researchers at Oak Ridge National Laboratory in Tennessee, USA, have developed units that store four times as much energy as a lithium-ion battery. It is claimed to be cheaper to make and safer, too.

A previous hitch with the technology was overcome by switching to a solid electrolyte, says the research team.

Solar looks to supercap storage

Maxwell Technologies has joined up with Soitec for a project to demonstrate the benefits of combining the former’s ultracapacitor energy storage with the latter’s concentrated solar technology, reports NewNet. The project, which has already started, is being bankrolled by a USD$1.39m contract from the California Energy Commission’s Research and Development programme, and will run until November 2015.

First Sitras sale in US transit market

Siemens is currently installing its first Sitras Energy Storage (SES) unit with supercapacitor technology in the US, on the TriMet Portland-Milwaukie Light Rail Transit Line.

The southeast Portland Tacoma substation location will house the first US storage unit that allows for energy created during braking to be stored and then re-used in one of two forms, energy savings or voltage stabilisation during peak demand times, says Siemens.

TriMet will use the system in voltage stabilisation mode to avoid problems that have led to disruptions in mass-transit operations. If a number of vehicles accelerate simultaneously, system voltage can drop below a critical level and result in instances of under-voltage tripping in vehicles and, consequently, disruptions in passenger service.

The SES ensures the system voltage always remains within the required range and voltage-related disruptions no longer occur.

Eaton system in smart grid project

Diversified industrial manufacturer Eaton has worked with Portland General Electric (PGE) to develop an energy storage system for the Salem Smart Power Center, a 5MW energy storage facility unveiled today in Salem, Oregon, USA.

The smart grid site will allow PGE to demonstrate how the integration of renewable energy sources, including wind and solar, and demand-response technology can increase the reliability and efficiency of energy for business and residential customers, says Eaton.

“Eaton’s collaboration with this important project will help Oregon and the nation learn how to build intelligent energy resources for the future while continuing to deliver long-term value for customers,” said Jim Piro, PGE president and chief executive. “Eaton’s power system expertise helped make the project possible and we appreciate the dedication to excellence they brought to this project.”

Doughnuts: just the thing for storage?

Depending on your point of view the plan announced by Belgium earlier this year is either pure James Bond, or straight from The Simpsons. The Bond take: the Belgian government is going to create a private island to help harvest power from the sea. Simpsons: the Belgians are building a giant doughnut to do away with nuclear power plants like Springfield.

Whatever your perspective, though, there is no doubt the Belgian scheme has the potential to change the script for marine renewable energy storage. In essence the idea is simply a new solution for that age-old conundrum of how to add storage to intermittent renewable energy sources such as wind, solar or wave power so they can be used for base-load power generation. But what a solution!

According to Reuters, the concept announced by Belgian North Sea minister Johan Vande Lanotte at a Zeebrugge port presentation will involve building a doughnut-shaped island out of sand three kilometres off the coastal village of Wenduine.

The hole in the middle will be filled with water that will be pumped out whenever there is excess power coming from the country’s offshore wind farms, which are ultimately planned to be able to deliver up to 2,300MW.

In times of need, meanwhile, gates in the walls of the doughnut/island will be opened up and the water flowing into the hole in the middle will be used to drive turbines, delivering hydro power that can be sent to shore.

The government reckons it will take at least five years to build but will help the country shift away from its reliance on nuclear power, which in 2011 accounted for about 57% of the energy consumed. Belgium currently has seven nuclear reactors in two power plants, at Doel and Tihange, generating a total of 5,761MW.

Two of the reactors were shut down last year after the operator, GDF Suez subsidiary Electrabel, found flaws in their reactor casings. Two more are due to be retired in 2015, with the rest following suit by around 2025. “This is a great solution,” a ministerial spokeswoman said in the Reuters report.

“We have a lot of energy from windmills and sometimes it just gets lost because there isn’t enough demand for the electricity.”

She is absolutely right. Although novel in terms of its scale and location, this is essentially a pumped hydro project. And pumped hydro goes with wind energy like Charlie Chaplin with a walking stick. The technique is already used extensively by Iberdrola of Spain to maximise the value of its myriad wind energy farms.

Meanwhile the Spanish island of El Hierro is on track to become 100% self-sufficient using wind energy, thanks to the Gorona del Viento project that uses a double-dam setup powered by onshore Enercon turbines.

On a wider scale, the immense hydro resources across Scandinavia could potentially play an important role in helping to store and redistribute energy from offshore wind farms in Germany and the UK. What does the Belgian proposal add to this picture, in terms of its significance for the marine renewable energy storage market? Three things, at least.

The first is that it would vindicate the idea that intermittent renewable energy, including marine generation from wind, wave and even floating solar, can be more than a match for existing base-load sources if combined with appropriate storage.

After all, let us not forget that the Belgians are not planning to replace gas peakers here, but nuclear power plants, arguably one of the steadiest pillars of base-load power provision.

The second point of note is any power generation scheme that involves shifting water in and out of a closed environment within a marine context would seem to be just crying out for integration with other ocean-based energy sources.

Belgium is clearly intending for the island storage facility to be used with wind power, for example, but could additional efficiencies be gained through clever engineering to trap tidal or even wave energy, too?

Finally, a point that will not escape the attention of policy makers elsewhere is that this is a project that will allow Belgium to produce its own, clean base-load power indefinitely, based on offshore wind. In other words, integrating wind power into its grid will not be a problem. It will not require a massive juggling act involving smart grids or electric vehicle batteries.

Nor will it involve costly and tricky grid connections to neighbours. Best of all, it will probably create thousands of jobs during the construction phase, and hundreds for ongoing operations, equivalent to the building of a new nuclear power plant but without the discomfort of radioactive waste or pressure groups.

Of course, the project, which is still awaiting a green light, is presumably not without its challenges. Building an entire island is no mean feat. One wonders where all that sand is going to come from, for a start. The Belgian government has also already recognised that Elia, the national grid provider, will have to strengthen its connections to the region.

Cost could be an issue, too; a government estimate of ‘about the same as a wind farm’ is difficult to evaluate without further details. Nevertheless, what is certain is that developments off the Belgian coast could be attracting a lot of attention in the next half-decade. Let’s just hope this doughnut doesn’t leave a bad aftertaste.

This article was previously published in Marine Renewable Energy.

SMA plans new South Africa factory

SMA Solar Technology is expanding its presence in South Africa with the creation of an inverter factory. “Here photovoltaics is already a financially attractive alternative to other forms of power generation,” said SMA chief executive Pierre-Pascal Urbon.

“The planned production for central inverters enables us to meet the local content requirements and thus to profit from the expected future growth of the South African market.”

ZBB commissions co-op installation

ZBB Energy Corporation has announced the commissioning of a ‘first ever’ ZBB EnerSection 125kW bi-directional inverter with lead-acid batteries in a utility-owned demonstration facility with onsite solar PV and wind turbine generation. The system includes ZBB EnerSection DC inputs for regulating power flows to and from four lead-acid battery sets.

The installation will demonstrate the numerous economic, operational, strategic and environmental value streams accomplished by prioritising and optimising renewables in unison with peak grid usage in distributed locations, says the company.

“The battery bank cycling will reduce our system losses, reduce our peak demand charges and improve efficiency on our system,” explained Warren Jones, distribution engineer on the project for Lower Valley Electric Co-op, the customer.